
We must focus on safety when driving. The best way is to check our vehicle before driving. Electric forklift manufacturers remind us not to drive blindly, which is not conducive to safe driving and avoid vehicle accidents. Excluded, cheap forklifts is a very time-saving and labor-saving equipment for handling goods. Today, let's talk about our new product cheap forklifts. Before using cheap forklifts, first check whether there is any new oil dripping on the ground, find the oil leakage site, and determine whether it can be operated or repaired according to the leakage situation. Let's check the distilled water of the electric forklift battery. Check whether the forklift tires are worn excessively, whether the rim is cracked, and whether the fastening bolts are tight and complete. Check whether the steering system and braking system meet the requirements under static conditions. Electric forklift manufacturers remind us to check whether the lights (large and small lights, turn signals, brake lights) and horns of electric forklifts are normal.

Then when cheap forklifts are driving, the height from the bottom of the fork to the ground should be kept at 300-400 mm, and the gantry should be inclined backward. Do not lift the fork too high while driving. When entering and leaving the work site or on the road, be careful that there are no obstacles scraping through. When the load is running, if the fork rises too high, it will also increase the height of the overall center of gravity of the forklift, affecting the stability of the forklift. After unloading, lower the forks to the normal driving position before driving. When turning, if there are pedestrians or vehicles nearby, a signal should be issued to prohibit sharp turns at high speed. Sharp turns at high speeds can cause the vehicle to lose lateral stability and tip over. When going downhill, the internal combustion engine forklift is strictly prohibited from slipping. Electric forklift manufacturers recommend that it is forbidden to brake suddenly when carrying goods, except in special circumstances.
These are all important things that must be done to ensure the safety of our lives. Don't do it because of trouble, so that we can better devote ourselves to the work and complete the work better.
-
3-step Troubleshooting for Reduced Load Capacity of Manual Hydraulic TruckManual hydraulic pallet trucks often fail to lift or sink due to oil shortage, pressure leakage and air intake. Three-step inspection can quickly restore the equipment’s load-bearing performance.Do you like ?0
Read more -
What is Pedestrian Counterbalance Stacker & Basic Operating StepsPedestrian counterbalance stackers with rear weights fit narrow aisles with high cost performance. Standard operating procedures improve warehouse efficiency and ensure operational safety.Do you like ?0
Read more -
Battery Maintenance Guide for Onboard Electric Self-elevating TrucksFrequent power loss on self-loading stackers is mainly caused by improper battery maintenance. Standardize daily charging, inspection and storage to extend battery service life.Do you like ?0
Read more -
4 Dimensions Comparison: Reach Stacker and Counterbalance Stacker for WarehouseReach stackers and counterbalance stackers differ greatly in structure and application. Compare aisle width, load capacity, scenarios and maintenance costs for accurate warehouse selection.Do you like ?0
Read more -
Causes of Black Smoke Failure of Outdoor Diesel Forklift & TroubleshootingBlack smoke from diesel forklift exhaust outdoors is mainly caused by insufficient fuel combustion. Distinguish temporary working conditions from persistent faults to reduce engine damage.Do you like ?0
Read more -
License Requirement for Warehouse Stand-on Counterbalance StackerWhether ride-on counterbalance stackers require operation certificates depends on equipment type. Operators need N1 forklift licenses for specified models to avoid regulatory risks.Do you like ?0
Read more



