What are the common faults of the self loading pallet stacker?

As a common means of logistics transportation, the self loading pallet stacker has some small faults which are very normal. If you want to be a qualified self loading pallet stcaker operator, it is essential to learn how to determine the cause of the fault and solve it smoothly. Next, the professional stacker manufacturer will tell you what are the common small faults of the forklift for sale and how to eliminate and repair them in the future.

If the speed of the driving wheel of the self loading pallet stacker drops significantly, it may be caused by the following reasons: the voltage in the battery is too low or the resistance is too high; Carbon deposition between commutator blades of motor leads to short circuit; The motor brake is not adjusted properly, resulting in the motor running with brake; Motor armature short circuit; The gearbox and bearing of the drive head are jammed and need lubrication urgently. In case of such problems, forklift operators can check and repair in this way: measure the battery voltage and clean the pile head; Clean the drive head gear box and add lubricating oil; Clean the commutator; Adjust the brake. The stacker manufacturer reminded that if the motor of the forklift for sale has a short circuit, the motor should be replaced in time.

If the pressure of the oil pump of the self loading pallet stacker is insufficient, it may be caused by the following reasons: the seal ring in the oil pump cover groove is damaged, resulting in internal leakage; The gear is worn and the oil pump motor speed is too low; The oil pump pipeline is blocked; Control valve pressure is too low or damaged; The pressure regulating valve is too low or damaged. The stacker manufacturer recommends that the forklift operator replace the oil pump cover, pressure valve, control valve, motor and clean the oil pump pipeline of the forklift for sale.

If the electrical accessories of the self loading pallet stacker are abnormal, it may be caused by these reasons: the position of the microswitch in the electrical box is not adjusted properly or the position is not adjusted properly; The main circuit fuse controls the electrical appliance fuse to blow; The battery voltage is too low; Too much dirt in the contactor leads to poor contact; The rotor is damaged. The stacker manufacturer recommended to maintain the : replace the drive motor components; Clean the contactor; Replace the controller of the forklift for sale.

These are some minor faults that are easy to occur on the self loading pallet stacker. With this knowledge, forklift operators can deal with emergencies more easily and solve them in time, and ensure work safety on the basis of ensuring work efficiency. The stacker manufacturer recommends that the forklift operators study carefully, because these knowledge is not only applicable to self loading pallet stackers, but also applicable to forklift for sale such as electric forklifts and electric pallet truck.