How to Choose Stackers for High-Level Access in Raw Material Warehouse

Building high racks is a common renovation method to expand storage capacity in raw material warehouses. However, many managers overlook that the storage capacity cannot be fully utilized without suitable handling equipment. Stand-on reach full electric stacker stands out from other stackers when applied in raw material warehouses.

Conventional stackers either have limited maximum lifting height or require wide aisles, making them unsuitable for dense high racks for raw materials. Many buyers know reach stackers need narrow aisles, but few understand the principle. Counterbalance forklifts rely on rear counterweight for stability and need ample turning space.

A reach stacker picks and places goods by extending its mast, so the main body does not need to get close to racks. This structural difference greatly reduces the right-angle stacking aisle width. For raw material warehouses, the saved aisle space can be used for extra racks, bringing considerable long-term storage benefits.

With the stand-on design, operators move along with the forks and enjoy less visual obstruction during high-level alignment. It reduces pallet and rack collision when stacking bagged and barreled raw materials on high racks. Lithium battery versions support long-hour two-shift operation, so the continuous replenishment and outbound rhythm of raw material warehouses will not be interrupted by insufficient power.

Pay attention to the load curve, a common pitfall in procurement. The rated load marked on the nameplate is tested under low lifting conditions. When lifted to a high position, the center of gravity rises and the safe load capacity drops. Raw materials are usually heavy bulk goods. If you select the model only according to the nameplate load, overloading risks and cargo falling hazards may occur during high-level picking. Model selection must be based on the residual load at the maximum lifting height.

Besides load capacity and aisle width, warehouse conditions also affect operation performance. Electric control and motors need dustproof protection for dusty raw material warehouses. Wheel sets and chassis stability should be considered if the ground has minor height differences. Mast selection is also important. Two-stage and three-stage masts have different lifting ranges and support different layers of racks, which should be confirmed with the manufacturer in advance.

Reach stacker for high storage in raw material warehouse is a reliable choice for both efficiency and safety. Feel free to contact us for detailed quotation and specification data.