How to quickly repair according to failure of the manual pallet truck suppliers?

The manual pallet jack manufacturers is a low lift and is limited to handling palletized cargo handling tools. Also known as the pallet truck suppliers, it has the characteristics of stable lifting, light handling, safety and reliability. However, manual pallet jack manufacturers will also have various faults due to frequent use. Next, let New Newton introduce you to the common faults and elimination methods of manual pallet truck suppliers.

Possible failures and elimination methods

First, insufficient lift

Cause analysis: manual pallet jack manufacturers insufficient hydraulic oil

Elimination method: add appropriate filtered working oil

Second, the return trip is not in place

Analysis of the reasons: 1. Manual pallet truck suppliers hydraulic oil filling too much

                                        2. The manual pallet jack manufacturers deformation of the rotating part is stuck

                                        3. The manual pallet truck suppliers plunger and the guide rod are stuck

Elimination method: 1. Take away the appropriate working oil

                                   2. Replacement parts

Third, the fork does not fall after rising

Reason analysis: 1. Manual pallet jack manufacturers unloading device is abnormal

                           2. Manual pallet truck suppliers part deformation damage

Elimination method: 1. Re-adjust the unloading device

                                   2. Replace the damaged parts

Fourth, Manual pallet jack manufacturers hydraulic oil leakage

Analysis of the reasons: 1. Manual pallet truck suppliers oil seal failure

                                        2. The surface of manual pallet jack manufacturers is slightly damaged or worn

                                        3. The manual pallet truck suppliers connection is loose

Elimination method: 1. Replace the oil seal

                                   2. Replace damaged parts

                                   3. Retighten the loose area

Five, the fork does not rise

Reason analysis: 1. The manual pallet jack manufacturers working oil viscosity is too large, or the working oil is not injected.

                            2. There are impurities in the manual pallet truck suppliers oil

                            3. Manual pallet jack manufacturers unloading device is abnormal

Elimination method: 1. Replace the working oil

                                   2. Remove impurities from the oil circuit and update the working oil

                                   3. Re-adjust the unloading device

Sixth, When the handle is shaken, the fork rises and then falls immediately. The handle has a large rebound phenomenon, or on the fork after the rise, there is a more obvious decline.

Cause analysis: the manual pallet truck suppliers valve is stuck by debris

Elimination method: open the valve, take out and clean the parts and replace them.