Industry

How to safely regulate the operation of electric pallet jack stacker?

0

Published by NEWTON May 28,2020

The electric stacker lift truck is a special electric vehicle. It does not require the relevant driver's license for operation. Therefore, it is generally possible to drive the electric pallet jack stacker for cargo handling and stacking after a small amount of training, but it is necessary to standardize the operation of the electric pile. High car, because this is an important guarantee of safety, what are the specifications for safe operation of electric stacker lift truck?

electric pallet jack stacker

1. The operator of the electric pallet jack stacker must not drunk, overweight, speeding, and prohibit sudden braking and sharp turns. Electric forklift trucks are prohibited from entering places where solvents and flammable gases are stored.

2. The safety device of the electric stacker must be complete and intact. The components are sensitive and effective, and the technical performance is good. It is strictly forbidden to drive the electric stacker lift truck with sickness. Usually, the electric pallet jack stacker should be equipped with necessary daily maintenance and various components. Carry out a serious inspection.

3. Maintain the standard driving state of the electric stacker lift truck. When the fork is driving off the ground, the fork is 10-20 cm away from the ground. When the electric pallet jack stacker stops, the fork falls to the ground height; the electric stacker lift truck is driving at a higher speed. When working in poor road conditions, the weight is appropriately reduced, and the speed of the electric pallet jack stacker should be reduced.

4. When the electric stacker lift truck is running, if the electric controller is out of control, the main power supply will be disconnected in time.

electric pallet jack stacker

5. The electric pallet jack stacker should pay special attention to the timely charging of the battery and the correct maintenance of the battery.

6. In the operation of the electric stacker lift truck, use the long-distance long-distance acceleration as little as possible. When the electric pallet jack stacker starts, the speed is increased, and the acceleration handle is stabilized. If the road condition is good, the electric stacker lift truck will continue to accelerate. . When the electric pallet jack stacker needs to decelerate, loosen the handle and press the operating handle, so that the deceleration energy can be fully utilized. If the electric stacker lift truck has a regenerative braking function, the kinetic energy during deceleration can be recovered. When the electric pallet jack stacker is going downhill, do not disconnect the electric stacker lift truck drive motor circuit, press the operating handle, so that the electric pallet jack stacker is used for regenerative braking, and the kinetic energy of the electric stacker lift truck is used. Reduce the energy consumption of the battery.

7. During the operation of the electric pallet jack stacker, do not take emergency braking frequently during high-speed driving; otherwise, it will cause huge friction to the brake assembly and drive wheel of the electric stacker lift truck, shorten the brake assembly and drive. The service life of the wheel even damages the brake assembly and the drive wheel.

8. When the electric pallet jack stacker is not in use, please put the fork to the lowest position to prevent the cylinder rod from being exposed to the rust in the air for a long time; the drive wheel and the front wheel of the electric stacker lift truck must be free of impurities. The object is entangled; the power is off.

stacker lift truck

< >
Latest posts