Different treatments for different faults of electric forklift truck suppliers


Published by NEWTON May 28,2020

The storage forklift will always encounter various failure problems and maintenance problems during use. Common problems include poor boost performance, overheating of the engine, malfunction of the thermostat, failure to start the equipment, and failure of the starter. The electric forklift truck suppliers reminds you that you need to learn the basic operation knowledge to check the fault problem. Next, we will analyze the failure problem component by component.

electric forklift truck suppliers

1. Poor performance
If the equipment performance is poor and the performance is poor, there may be hydraulic problems, usually leaks, cracks, or damaged hoses. The electric forklift truck suppliers recommends that you wipe the hoses and pipes with a clean cloth. If there is a leak, it means that there will be residual hydraulic oil in the cloth or pipeline. It may be that the hose is broken and needs to be replaced; if there is no residue on the cloth, check along the rod for more than a thin layer of oil. If a large amount of oil is found, it is likely that the seal is leaking and needs to be replaced immediately.

electric forklift truck suppliers

2. The engine is overheated
There are many reasons for the overheating of the electric forklift truck engine, the more common one is the radiator blockage. If the equipment is used for a long time, dirt and debris will block the radiator port, causing the engine to overheat. When troubleshooting, the electric forklift truck suppliers recommends that you check the radiator port for mud or dirt, and if so, use fresh water to gently clean up the debris. After cleaning, start the engine to see if it has improved. If there is still overheating, the radiator may be corroded. If necessary, replace the radiator.

3. Thermostat failure
The thermostat is used to prevent the engine from overheating. When the trigger temperature is detected, the electric forklift truck suppliers company reminds you to turn it on, inject coolant into the engine, and then check whether the thermostat is working properly. If not, it is recommended to replace it.

electric forklift truck suppliers

4. The device fails to start
When this happens, the first thing to do is to check the battery. Ensure that the battery is properly connected in the device, and that the battery case or terminals are not corroded. If it is normal, test the battery functional capacity. If the working efficiency of the battery is lower than 80%, it should be replaced. If this is the problem, the battery overheats when you charge the battery, which indicates that it may work at a low electrolyte level. The electric forklift truck suppliers recommends adding water.
The above is the relevant content of different faults and different treatments brought by the electric forklift truck suppliers. If you need handling equipment, please call to consult.

< >
Latest posts