10 considerations for hydraulic scissor lift table cart!

In our lives or in some industries, hydraulic scissor lift table cart are often seen. The hydraulic scissor lift table cart brings us convenience and efficiency, but many people don't know much about the operating methods and precautions of the hydraulic scissor lift table cart. The following NEW NEWTON will come to detail.

1. The hydraulic scissor lift table cart should be regularly maintained by a dedicated person.

2. The hydraulic scissor lift table cart must be a trained professional operator, and must apply for a high-altitude operation permit before use.

3. The hydraulic scissor lift table cart operator must check whether the electrical circuit and mechanical equipment are in compliance, whether the circuit control is normal, whether the oil level is normal, whether the oil pipe is normal, and the working range of the hydraulic scissor lift table cart cannot have obstacles that hinder the hydraulic scissor lift table cart.

4. The hydraulic scissor lift table cart is seriously overloaded.

5. Before starting the hydraulic scissor lift table cart, you should choose a flat ground and open four supporting legs. If the foundation is soft or undulating, you must use the sleeper to ensure that the four feet are grounded and the adjustment is stable before lifting.

6. The operator on the hydraulic scissor lift table cart should wear a seat belt. When working in a live area, the vehicle body should be grounded. The hydraulic scissor lift table cart should be carried out by the person in charge of the work.

7. Before the hydraulic scissor lift table cart is operated, the person in charge of the work shall provide technical and safety instructions to the operator.

8. Before operation, check the air-accessible and high-voltage lines. According to the current regulations and standards, the platform should be kept at a safe distance from the charged high-voltage line from beginning to end.

9. When working on the hydraulic scissor lift table cart, no one is allowed to work outside the railing under any circumstances.

10. Care should be taken to prevent the wire rope, wires, hoses, etc. from being entangled when the hydraulic scissor lift table cart is raised, lowered or moved.

11. During the use of the hydraulic scissor lift table cart, the running direction must not be arbitrarily changed, and it must not be suddenly stopped or stopped. During normal driving, stop midway stop. In case of special circumstances, the hydraulic scissor lift table cart can be stopped midway.

12. After the hydraulic scissor lift table cart is deactivated, the hydraulic scissor lift table cart must be lowered to the lowest base and the power supply must be disconnected.