How to properly use and maintain the battery of a semi electric stacker?

The semi electric stacker is a manual push-pull walking, which can be raised and lowered electrically. small electric forklifts are suitable for short-distance transportation in factories, warehouses, logistics and other enterprises and loading and unloading in areas with low workload. The maintenance of the semi electric stacker is relatively simple. The maintenance of the key components of the battery is the top priority. How to charge the battery of a semi electric stacker? We understand from the following points.

1. The charging environment of the small hydraulic lift is clean and ventilated. If possible, the battery can be removed or the cover of the semi electric stacker can be opened;

2. The electrolyte level of the semi electric stacker should be 15mm higher than the separator, and the electrolyte should be replenished in time below this mark to prevent the battery from losing power and affecting the life of the light battery-the semi electric stacker. In addition, the temperature of the electrolyte should not be higher than 45 degrees during charging;

3. Do not expose the semi electric stacker to an open flame when charging, because the battery will produce a large amount of combustible gas during the charging process, so prevent the small electric forklift from catching fire during the charging process. Charging process

4. The semi electric stacker should avoid skin and acid contact during charging. If there is contact, please use a lot of soapy water or consult a doctor;

5. The battery should be kept clean and dry at ordinary times, and it is not allowed to place other items on the battery of the small hydraulic lift;

6. Waste batteries of semi electric stackers should be disposed of in accordance with the National Environmental Protection Law.

semi electric stackers generally can carry 2 tons, and the load will drop along the load curve after more than 2 meters. After lifting by 2 meters, it can carry 1-1.3 tons, and when it is raised to 3 meters, it can carry only 800 kg. This is related to the load curve. The higher the height, the lower the load. More than 2 meters will appear "lost load" phenomenon.

The load curve change chart produced by the semi electric stacker forklift manufacturer must strictly follow this curve when stacking goods. Don't get lucky: it may, maybe nothing will happen! If it happens, then the injury will be fatal. Therefore, the purchase of a semi electric stacker must be determined according to the actual usage! Then choose products that meet safety standards and have reliable after-sales service.