What are the requirements for operating a forklift?

Forklift plays an increasingly important role in production and life. It can carry and stack goods, greatly saving manpower, improving work efficiency and increasing the economic benefits of enterprises. No matter what work you do, safety is the first priority. It is believed that the forklift operator has established safety awareness when obtaining the forklift certificate. So, how to protect the goods from damage and ensure their own operation safety? The forklift manufacturer China will tell us about the operation requirements of the forklift.

When reversing, the forklift operator must always look back and slow down. On the one hand, this is to prevent obstacles behind the forklift from causing impact; on the other hand, it is to prevent operators behind the forklift from causing casualties. When driving close to the platform, the distance between the wheel and the platform edge shall be more than 0.3 m to prevent the forklift from falling off the platform. During operation, if the lifting height of the goods is too high to block the view, the forklift operator should focus on the fork, not only on whether the stacking height is appropriate, but also on the safety above. Forklift manufacturer China often hears of such accidents: forklift operators lift the goods too high to block the sight. When passing through the narrow passage, the width of the goods is not found to be greater than the width of the passage, resulting in the goods hitting the column or warehouse door, falling from the fork, and hurting the forklift operators. Although the forklift produced by the forklift manufacturer China is equipped with a safety canopy, which can protect the safety of forklift operators, the damage of goods is inevitable.

When operating a forklift, the forklift operator must wear work clothes and protective equipment, and must not be shirtless, barefoot or wearing sandals. Eating and smoking are prohibited during work. In order to avoid excessive fatigue, ensure operation safety, and improve work efficiency, the forklift manufacturer recommends that the forklift operators take 10 minutes off every 2 hours of work. Before working, the forklift operator must understand the nature of the goods packaging, and be careful to fork out the easily damaged goods such as porcelain, glass products or electrical appliances packed in cartons, thin iron sheets, paper bags, cloth bags, etc. If the pallet of the forklift is found damaged, it must be repaired in time. The forklift manufacturer China told us that if there is a broken plate on the pallet, it is easy to cause the goods to collapse or collide with each other when entering the fork.

There are many requirements when operating the forklift. Forklift operators must be familiar with the contents of the forklift operation manual and enterprise safety training provided by the forklift manufacturer China before taking up their posts, and must pay attention to it. Don't think that many accidents are far away from you, and take chances.