
Electric pallet truck stacker is widely used in warehouses, workshops and other fields, providing people with great convenience. But when we use the equipment, we must pay attention to the maintenance of the equipment. We can't ignore the equipment after use, because there is maintenance work waiting for us to do before storage. How does it work? Take a look with electric stacker supplier.
The first thing to do is to thoroughly clean the electric pallet truck stacker, check the brakes, and the hydraulic oil level. If the amount of hydraulic oil is low, add hydraulic oil as needed. If there are mechanical parts that have not been surface-painted, the electric stacker supplier reminds you to apply a thin layer of lubricating oil or grease on the surface, lubricate the electric stacker, and charge the battery regularly.
Unplug the battery when charging, clean the battery, and apply special grease on the motor bolts. If the electric pallet truck stacker is not used for more than 2 months, the electric stacker supplier recommends storing the stacker in a frost-free and moisture-free dry space. In this process, the stacker should be supported with a bracket, and all wheels should be off the ground to avoid wear and tear of wheels and wheel bearings during storage.

If there is a problem with the switch of the electrical system, it is recommended to spray the contact spray on the exposed contact surface, and to remove the oxide layer on the contact surface of the operating element by repeatedly performing the switching operation. After the electric pallet truck stacker is put into use, the driver needs to repeatedly test the braking performance to ensure that it is correct.
The electric pallet truck stacker produced by electric stacker supplier is very important to ensure the safety of the charging room when charging, otherwise gas will enter the battery and cause the wrong extension cable to be connected to the charging device. A damaged connection cable is short-circuited, which increases the risk of collision damage. Therefore, we have to learn about the maintenance of the battery room of the electric pallet truck stacker.
Prepare for prevention first. Workers wear protective equipment, including masks, acid-resistant gloves, slippery, toe-protecting acid-resistant shoes, goggles, adequate fire extinguishers and neutralizers. There must be an eyewash and shower system. Gas is generated when the battery is charged. This gas may be harmful to the human body. Therefore, the electric pallet truck stacker believes that a good exhaust system should be installed, and then a professional hygienist should evaluate the situation. Whenever safety issues are the top priority, electric stacker supplier will require us to be foolproof.
-
3-step Troubleshooting for Reduced Load Capacity of Manual Hydraulic TruckManual hydraulic pallet trucks often fail to lift or sink due to oil shortage, pressure leakage and air intake. Three-step inspection can quickly restore the equipment’s load-bearing performance.Do you like ?0
Read more -
What is Pedestrian Counterbalance Stacker & Basic Operating StepsPedestrian counterbalance stackers with rear weights fit narrow aisles with high cost performance. Standard operating procedures improve warehouse efficiency and ensure operational safety.Do you like ?0
Read more -
Battery Maintenance Guide for Onboard Electric Self-elevating TrucksFrequent power loss on self-loading stackers is mainly caused by improper battery maintenance. Standardize daily charging, inspection and storage to extend battery service life.Do you like ?0
Read more -
4 Dimensions Comparison: Reach Stacker and Counterbalance Stacker for WarehouseReach stackers and counterbalance stackers differ greatly in structure and application. Compare aisle width, load capacity, scenarios and maintenance costs for accurate warehouse selection.Do you like ?0
Read more -
Causes of Black Smoke Failure of Outdoor Diesel Forklift & TroubleshootingBlack smoke from diesel forklift exhaust outdoors is mainly caused by insufficient fuel combustion. Distinguish temporary working conditions from persistent faults to reduce engine damage.Do you like ?0
Read more -
License Requirement for Warehouse Stand-on Counterbalance StackerWhether ride-on counterbalance stackers require operation certificates depends on equipment type. Operators need N1 forklift licenses for specified models to avoid regulatory risks.Do you like ?0
Read more



