How to use and maintain the battery of the electric pallet truck manufacturers?

Before using for the first time, check that the lithium battery in the electric pallet jack suppliers is fully charged. In order to meet the transportation requirements, the battery of the electric pallet truck manufacturers is not fully charged, and it needs to be charged after the first use.

Replace the lithium battery

The lithium battery of the electric pallet jack suppliers can only replace the battery with the same weight and the same as the original battery model. The weight and size of the battery in the electric pallet truck manufacturers cannot be arbitrarily changed, otherwise it will affect the center of gravity of the electric pallet jack suppliers body. Excessive or too light battery weight can affect the stability and braking capability of a electric pallet truck manufacturers.

The battery has high voltage and energy. Do not cause a short circuit. Do not let the tool approach the two poles of the battery to avoid sparks or short circuits, turn off the power when maintaining and maintaining the electric pallet jack suppliers.

Do not smoke or use an open flame while charging.

 To charge the battery of the electric pallet truck manufacturers, you must use the original charger provided by the manufacturer. Be careful not to overcharge or overcharge, so as to avoid damage to the lithium battery of the electric pallet jack suppliers.

When charging a electric pallet truck manufacturers, especially when charging in a closed area, maintain a good ventilation environment. In the charging process of the electric pallet jack suppliers, encountering showers, open flames, electric sparks, etc. may cause an explosion!

Therefore, before removing the power outlet, the charging power of the electric pallet truck manufacturers should be cut off.

Charging preparation

The electric pallet jack suppliers must be charged as soon as possible after use, and the storage time must not exceed 24 hours.

(1) After the electric pallet truck manufacturers stops, press the emergency stop switch and pull out the emergency stop switch key.

(2) Pull out the charging plug of the electric pallet jack suppliers and plug it into the appropriate power supply (220V 50HZ).

(3) Turn on the AC power switch to start charging.