Daily maintenance of small electric forklift

The Spring Festival has just passed, and the weather has gradually warmed up. With the rise in temperature, the engineering industry and warehousing work have also begun to enter the preparation period. There is no doubt that the small electric forklift will usher in a stage of widespread use. During this period, it is necessary for electric forklift manufacturers to carry out an inspection and maintenance for storage equipment such as forklifts. Today we will teach you how to perform daily maintenance on forklifts.

First check the appearance of the small electric forklift body. Whether there are obvious cracks, crack welding, deformation, scratches on the appearance of the car body, check whether the positioning pins, connecting bolts, nuts, cotter pins, etc. are missing, loose, deformed, invalid or poorly functioning. Then check whether the signs and car numbers are complete and clear. Electric forklift manufacturers suggest not to ignore local rust and blistering.

After inspecting the appearance, it is necessary to check whether the lighting and horn instruments of the small electric forklift are working properly. When getting on the vehicle for the test, check whether the seat is damaged or poorly fixed, and then check whether the fire extinguisher is invalid and check for missing items. Test whether the horn button is badly fixed or damaged, and whether the sound is clear and loud enough. Then check if there is any poor contact such as no steering, brake lights and lights.

Next is the inspection of small electric forklift batteries mentioned by electric forklift manufacturers. Check whether there are impurities on the surface of the battery, whether the cork is normal, whether the vent hole is blocked, whether the pile head is oxidized, rusted, ablated, or loose; whether the connecting wire is loose; whether the battery box is corroded. The density, voltage and liquid level of the battery electrolyte should be checked for compliance with regulations, whether there is cracking, leakage and overflow; whether the capacity is sufficient, and whether there is a short circuit inside the battery.

The inspection of the hydraulic system of the small electric forklift is also essential. Check whether the vent hole of the fuel tank is not smooth; whether the pipeline and joint are damaged or leaked. electric forklift manufacturers inspect the lift and tilt cylinder plunger rod for scratches, groove marks, cracks or bending deformation. Check whether the forward tilt has no throttle valve or whether the throttle valve fails, and whether the safety valve is normal.

The situation with the small electric forklift engine cannot be ignored either. Check whether the tightness of pipelines, joints and belts exceeds the standard. Whether there is a sharp increase in the speed, self-stop, and the oil level rises. Whether the charge controller is damaged or the engine water tank cover is seriously deformed or poorly fixed.