Will The Semi-electric Stacker Be Damaged By Rain? Rainwater Treatment Steps

Many small warehouse operators worry about outdoor operation in rainy days. If you are asking Will The Semi-electric Stacker Be Damaged By Rain, we suggest avoiding rain exposure as much as possible. Light drizzle causes little harm, but long heavy rain will trigger electrical faults. Follow these steps immediately once the truck gets soaked.

First, cut off the main power supply (most critical step) Do not operate lifting switches repeatedly after heavy rain. Unplug the battery connector right away to avoid short circuit and burnt controller board. Wipe off water on battery terminals with dry cloth.

Second, disassemble electrical parts and air-dry thoroughly Open the control box, wipe up water, then blow cold air for more than 30 minutes to remove residual moisture. Clean water inside control buttons to prevent contact oxidation. Leave the whole truck in ventilated place for half a day before power-on test.

Third, carry out anti-rust treatment on metal parts Rainwater causes rust on mast chains, pins and rollers. Coat all metal parts with grease after drying. Inspect cylinder oil seals to stop rainwater from polluting hydraulic oil.

Long-term rainy season protection Seal wire terminals with anti-rust grease. Install a simple rain cover if the truck works near warehouse gates. Regularly check cable insulation in humid storage rooms.

In summer rainy season, proper rain maintenance can extend service life and cut breakdowns of your Semi-electric Stacker For Small Warehouse. Leave a message if you need further technical support.