Maintenance guide for pedestrian electric pallet trucks

   A pedestrian electric pallet truck is a vehicle used for industrial transfer, which can not only operate, but also transfer palletized goods in pieces. Because its power source is a battery, it is energy-saving and environmentally friendly, the body is small and flexible, and the centralized control handle is easy to operate. Next, let's take a look at the maintenance methods of pedestrian electric pallet trucks.

First of all, always pay attention to the battery level and charge it in time to ensure that the power is sufficient. Secondly, check the reliability and flexibility of the steering components, as well as the tightness of each component, such as wheel screws, servo screws, wheel fixing rods, lifting chain pull-in screws, etc. In addition, it is necessary to regularly check whether there is any leakage, including hydraulic system lifting cylinders, batteries, drive motors, pipe joints, etc. At the same time, it is necessary to check the pedal strength of the pedestrian electric pallet truck and the quality of the control handle buttons. In addition, it is necessary to regularly check the wear degree of the drive gear, and add lubricating oil in time to ensure its smoothness and avoid excessive wear. In addition, it is necessary to check the receptive strength of the bifurcation, as well as the movement of the hydraulic cylinders, and if it becomes dull, it is necessary to add smooth oil.

     In the maintenance process, the battery should be prohibited from overcharging and discharging, and the battery should be charged equally. Newly purchased electric vehicles should be fully charged at one time, and the battery should be charged at the operating frequency. Do not place conductive objects on the battery when charging, and keep the appearance of the battery clean and dry. During operation, the battery voltage, electrolyte density, and temperature need to be checked once a week, and the total

amount measured should be done once a month. The battery should be placed in a clean, dry, ventilated place, avoid exposure to direct sunlight, and never touch the battery or heavy objects. After the vehicle is used, you need to clean the dirt and garbage from the vehicle and check whether the power cord is intact. In addition, hydraulics need to be maintained every six months to check whether the cylinders, fittings, hoses, etc. are leaking, and whether the electrical insulation is normal.