What needs attention when start and drive electric hydraulic forklift

After a careful study of the news, we will find that many accidents occurred when driving electric hydraulic forklift are caused by the driver's non-standard operation. Although the electric hydraulic forklift is more environmentally friendly, safe and more comfortable to operate than the traditional forklift, it is risky if no advanced and intelligent equipment can be used in a standardized way. Next, electric forklift manufacturer will tell enterprises and drivers what to pay attention to in the starting and driving process of electric hydraulic forklift.

Before driving the electric hydraulic forklift, be sure to observe and clean the work site and work passage to avoid foreign matters affecting the driving. When starting, do not turn on the emergency switch, but turn on the electric lock and switch. It is better to start slowly while honking the horn to remind the workers around to avoid danger. When starting, it is forbidden to quickly step on the speed regulating pedal to prevent excessive starting current from burning the motor. During driving, do not accelerate too fast, and do not drive at low speed for a long time. Emergency braking shall be avoided as far as possible. In case of an emergency, the manufacturer of electric forklift told everyone to quickly pull down the knife switch, step on the brake pedal and stop immediately. In this case, the electric hydraulic forklift produced by electric forklift manufacturer is equipped with perfect safety protection functions, which can ensure the safety of the driver to the greatest extent.

When driving the electric hydraulic forklift, drive on the right side. The fork is about 100-200 mm above the ground, and the mast keeps backward. If several vehicles are traveling in the same direction, the distance between vehicles shall be at least 2m. If two cars are moving in opposite directions, the empty car should give way to the car carrying the goods. When towing a trailer with a forklift, it is strictly prohibited to drive in a curve to avoid danger caused by heavy current discharge. When turning, slow down to avoid falling goods. At the same time, pay attention to the inner wheel difference to prevent the trailer from scratching the inside or driving out of the road. If the operating voltage is lower than the minimum voltage requirement of the vehicle, the vehicle must be stopped immediately for inspection and charging. Electric forklift manufacturer remind that drivers should also pay attention to that it is forbidden to use forks to carry people, not to be greedy for fun, otherwise the consequences will be unimaginable.

The above are the precautions for starting and driving an electric hydraulic forklift. It can be seen that there are still many details to pay attention to, which need to be carefully studied by the driver. Enterprises that are interested in purchasing electric hydraulic forklifts should also study hard, pay attention to them, and communicate them to drivers, so that they can ensure personal safety while ensuring the efficiency of operations. If you have anyquestions about the electric hydraulic forklift, you can consult the electric forklift manufacturer.