Application of Electric Forklift Operation Control Device

The working device of electric forklifts is generally operated by the right hand. Before operation, it is necessary to read the signs clearly and operate cautiously as follows:
1. Fork lifting control lever. When lifting goods, you should first step on the accelerator pedal slightly to increase the speed and power of the electric motor; The lifting speed of the fork can be achieved by controlling the degree of positioning of the control lever and the speed of the motor. The manufacturer of electric forklifts reminds that when starting and stopping the lifting of goods, the action should be gentle, and the fork speed should be slow to avoid scattering, damage to goods, and mechanical damage.
2. Electric forklift gantry tilt control lever. When operating the gantry to tilt forward or backward, the forklift should brake. When the gantry tilts back, slightly press the accelerator pedal to increase the motor speed and power.

The tilting speed of the gantry can be achieved by controlling the degree of positioning of the control lever and the engine speed. When operating the joystick, the action should be gentle and the speed should be slow. The manufacturer of electric forklifts reminds that when the gantry tilts forward or backward quickly, there should be appropriate margin left and not "fully tilt" to extend the service life of the safety overflow valve.
When lifting goods, the gantry must be placed in a vertical or backward tilting position to prevent the forklift from tipping forward due to overload; It is strictly prohibited to drive the gantry in a forward tilt position to prevent scattering and damage to goods.
3. Electric forklift accessories control lever. For forklifts equipped with accessories such as cargo presses and grippers, corresponding accessory control levers are installed on their distribution valves. The manufacturer of electric forklifts reminds that when operating these control levers, the action should be gentle, especially after the fixture comes into contact with the goods. The amount of action of the control lever should be paid more attention to, not only ensuring the stability and reliability of the goods, but also preventing damage to the goods.