What to do if the battery shell of the 3 ton electric forklift is damaged?

The 3 ton electric forklift is a mechanical vehicle driven by batteries, so the batteries are very important for the electric forklift. There are positive and negative plates inside the battery. The positive plate is mostly tubular plate, and the negative plate is mostly paste plate, protected by glass fiber, so the active substance is not easy to lose. On the outside of the battery, there is a shell to protect the internal parts from damage. However, due to various reasons, the shell of the battery may be damaged. How to deal with such problems? The electric forklift manufacturer teaches you.

In case of damage to the battery shell of a 3 ton electric forklift, the plastic welding method can be adopted. Find the damaged part, delimit the approximate range, and then tighten the liquid filler cap of the battery to prevent the liquid from flowing out. Clean the damaged battery area with a brush dipped in water. If the time is short, the temperature-regulating plastic welding torch can be used to dry the water on the surface. Next, the battery vent can be sealed with transparent tape or other stickers. The electric forklift manufacturer recommends to use the plastic rod softened by the temperature-regulating plastic welding torch to seal the air vent, which is more convenient for repair.

Turn the damaged part of the 3 ton electric forklift battery upward, and select the gear of the temperature-regulating plastic welding torch. Prepare some "patches" in advance. The easiest way is to reuse the discarded battery shell. Press the "patch" on the damaged part, heat it with a temperature-regulating plastic welding torch until it is fully bonded, and then cool it. After repair, unseal the liquid filler cap and vent hole, and check whether there is liquid leakage. The electric forklift manufacturer suggests that it should be charged in time after the repair, supplemented with distilled water, and then reinstalled for use.

No matter what the price and brand of the 3 ton electric forklift, the damage of the battery shell is a very common problem. Drivers need not worry too much. You can take the above methods to repair themselves. This can greatly save a lot of money and time to buy batteries and improve work efficiency. However, if the shell of the battery is seriously damaged, the electric forklift manufacturer still recommends replacing it with a new shell or a new battery.